iConverter
®
iConverter 4Tx
4-Port 10/100BASE-TX Managed Ethernet Switch
The iConverter 4Tx 10/100 Ethernet Switch module is a member
of the managed iConverter product family. The 4Tx provides a
compact 4-Port 10/100 Ethernet switch that is expandable
across the iConverter 19-Module, 5-Module and 2-Module
chassis backplanes, as well as being supported as a
standalone switch with the iConverter 1-Module Chassis.
The iConverter 4Tx UTP ports feature 10/100Mbps, Half or
Full-Duplex and auto-negotiation with both hardware and
software controls. Hardware control is available for two ports
while all four ports are under software control for these features.
RJ-45 crossover support eliminates need for a crossover cable
and facilitates connectivity to different types of network
equipment. The 4Tx crossover switch is supported on Port 1.
Ports 2, 3 and 4 support an automatic crossover detection
mode. The 4Tx also features two Ethernet backplane ports to
provide connectivity to adjacent modules for network expansion
and for in-band connectivity to an iConverter Network
Management Module.
„
„
„
The iConverter 4Tx Managed Ethernet Switch supports
10BASE-T or 100BASE-TX on four UTP ports
Enhanced features include Port VLAN, Port Access
Control and MIB Statistics
4Tx enhanced features include Port VLAN which allows
complete control of traffic flow between a module’s ports, and
Port Access Control which incorporates remote enabling and
disabling of each individual port. The 4Tx supports reporting of
MIB statistics that are available for 32 variables per port, reporting
a wide range of real-time packet statistics to provide
performance and operational monitoring.
Multiple 4Tx modules can be installed to expand the
port concentration in a single chassis
„
„
Supports Half or Full-Duplex and auto-negotiation
RJ-45 crossover support eliminates need for
different cables in connecting to various devices
„
„
„
Ethernet backplane ports for connectivity to adjacent
modules
Management is available with the addition of a
management module to the chassis
SNMP management via NetOutlook™ provides real-time
port and module information, remote parameter
configuration and trap notification
„
„
„
Conforms to IEEE 802.3, 10BASE-T and 100BASE-TX
specifications
iConverter 4Tx modules are hot-swappable and can be mounted
in a 19-Module (2U high) or 5-Module (1U high) rack-mountable
chassis (19-inch or 23-inch) with any combination of redundant
AC, 24VDC or 48VDC power supplies. They can also be mounted
in a 2-Module AC or 18 to 60VDC powered chassis, or in a
1-ModuleAC/DC powered chassis.
Modules are hot-swappable in 19-Module, 5-Module,
2-Module or 1-Module chassis
Lifetime Warranty and free 24/7 Technical Support
|
Miele Welding Consumables KM2030 en CA User Manual
Miller Electric Welding System Welding User Manual
Multi Tech Systems Network Router RF802EW User Manual
Nostalgia Electrics Popcorn Poppers RKP630SERIES User Manual
Olympus Camera Lens MCON 35 User Manual
Omega Engineering Marine Sanitation System FLR5000 series User Manual
Omron Healthcare Blood Pressure Monitor HEM 739 User Manual
Onkyo Stereo Receiver TX SR703 703E User Manual
Panasonic Digital Camera 3TR006490BAA User Manual
Patton electronic Surge Protector 515 DB 15 User Manual